IEC60669-1 LED Testing Equipment / Self Ballasted Lamp Switches Fully Automatic Breaking Capacity Endurance Tester

IEC60669-1 Self Ballasted Lamp Switches PLC Control Fully Automatic Breaking Capacity Endurance Tester

Product introduction :

This device is suitable for breaking capacity and normal operation life test of switches intended for self ballasted lamp loads. Switches intended for self ballasted lamp (SBL) loads shall withstand, without excessive wear or other harmful effect, the electrical and thermal stresses occurring when controlling self ballasted lamp circuits. To verify whether the switch has sustained arcing nor welding of the contacts occur, any contacts adhesion phenomenon or long term closure or disconnection phenomenon, to test whether excessive wear or other harmful consequences.

This system is designed and manufactured according to the standard of IEC60669-1:2017 clause 19.3 and IEC60669-2-1:2015 clause 19.109. It is a fully automatic test system based on the test readability of a switch with a rated voltage of 250V, including an intelligent industrial control system (built-in oscilloscope), a switch endurance tester, and a self-ballasted lamp load box. (The switch with rated voltage of 130V needs to be separately configured with self-ballasted lamp load box)

Product feature :

1. The system consists of an intelligent industrial control system, a switch endurance tester, and a self-ballasted lamp load box. Among them, the switch life tester and the self-ballasted lamp load box can be used separately.

2. The intelligent industrial control system is mainly for IEC60669-1:2017 clause 19.3, built-in oscilloscope, when the LED light switch is turned on, it can collect the voltage, current, current peak value I_peak and integral value I²t of this circuit, and can output current waveform. And through system calculation, compared with the standard data, make a qualified or unqualified judgment.

3. The switch life tester consists of three independent linear mechanisms and an electric control system. It can used to test the making and braking capacity of the linear switch (button, rocker, ship type, toggle) and normal operation test. The machine is driven by servo motor and controlled by PLC. It can set the test times, test speed, ‘on’ period(25+5 0%) ‘off’ period (750 -5%)time and test stroke. With load connection port, different test loads can be connected as needed, such as tungsten filament lamp load, externally ballasted lamp load, TV load, inductive load, capacitive load, motor load and so on.

4. The self ballasted load lox has been preset with standard load conditions before shipment. As long as the test voltage is adjusted to 250V~, the operator presses the switch button with the same rated current as the switch to be tested, and its rated power, impulse waveform, I_peak and I²t meet the corresponding requirements of the standard. The whole machine has 3 channels, only for switches with a rated voltage of 250V, of which two channels are 250W (IEC60669-1: 2017 clause 19.3), and the other channel is 400W (IEC60669-2-1: 2015 clause 19.109). This self ballasted load lox has calibration mode and calibration dedicated port, built-in 90 degree closing plate, connected with industrial control system, can output waveform, I_peak current value and I²t energy value, fully meet the standard calibration requirements for equipment.

Technical parameters:

Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Our core technologies encompass vacuum, leak testing & automatic control, laboratory test equipment & solution. Our technical leader is an expert in leak detection, his more than 2 decades of experience are a great asset to our firm. Our technical team is comprised of wellexperienced engineers and technicians.

HongCe laboratory testing equipment are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental testing equipment; household appliances testing equipment; wire and cable testing equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.

HongCe production line testing equipment are mainly customized according to client's workpieces, such as automatic leak testing system, gas recovery system, other tailor-made system based on vacuum & leak testing technology.