Corrosion Resistance Mechanical Carbon Fiber Sheets , Glass Fiber Board

Yellow insulation board A high degree of resistance high temperature resistant epoxy plate.

Epoxy phenolic epoxy plate, also known as epoxy glass fiber board, laminated glass cloth plate, models

for 3240, epoxy resin is referring to molecule contains two or more than two epoxy groups of organic

polymer compound, in addition to the individual, their relative molecular quality is not high.The molecular

structure of the epoxy resin based on molecular chain containing lively epoxy groups for its

characteristics, epoxy groups can be placed at the end of the chain, or into a ring structure in the middle.

Due to the molecular structure contains a lively epoxy groups, so they can be crosslinking reaction with

multiple types of curing agent and forming insoluble, not fuse with three to the network structure of

polymer.

The application of epoxy plate epoxy bar features:

1. A variety of forms.Almost all kinds of resin, curing agent, modification agent system can adapt to all

kinds of application of form request, ranging from extremely low viscosity to high melting point solid.

2. Convenient curing.Choose a variety of different curing agent, epoxy resin system can almost cured at

0 ~ 180 ℃ temperature range.

3. Strong adhesive force.Epoxy resin molecular chain in the existence of the inherent polar hydroxyl and

ether bond, make its have the very high adhesion strength of various substances.During the curing

reaction of epoxy resin of low contractility, produced by the internal stress is small, it also helps to

improve the adhesion strength.

4. Low contractility.Epoxy resin and curing agent used in the reaction is by direct addition reaction or

resin molecules in the ring opening polymerization of epoxy base, there is no water or other volatile

by-products sent out.They are compared with those of unsaturated polyester resin and phenolic resin

in the process of curing showed low contractility (less than 2%).


5. The mechanical properties.After curing system of epoxy resin with excellent mechanical properties.

Specification

Insulating barrier product overview: insulating barrier material USES epoxy resin with non-alkali glass fiber

cloth soaked pressure drying curing and forming.
Product features: high density, no water, good electrical insulation properties, high mechanical strength,

thin profile, light weight, reasonable design, convenient installation
Insulating barrier product overview: insulating barrier material USES epoxy resin with non-alkali glass

fiber cloth soaked pressure drying curing and forming.
Product features: high density, no water, good electrical insulation properties, high mechanical strength,

thin profile, light weight, reasonable design, convenient installation

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.