Latex Scraping Self Cleaning Filter Automatic Operation For Dirty Water

Latex Scraping Self Cleaning Filter, Mechanically Cleaned Bentonite Filtration

Description

Latex scraping self-cleaning filter ( DFA FILTER for short), is the new high performance scraping self-cleaning filter independantly developed by LIVIC. It automatically removes the particles and impurities from the filter element internal surface by mechanical scraping and it can continuously work on-line. DFA is designed for filtration of high viscosity up to 800,000mPa.s. The filtration degree ranges from 50~1500μm. It can scrape the impurities off the filter element surface most quickly, which makes it more efficiently removing the impurities. It is applicable for water and various viscous liquid. The DFA filter is designed and manufactured by following LIVIC's high performance, high quality and high reliability standard. It is a world-class quality filter.

The conventional filters get clogged frequently when filtering the viscous liquid and removing the soft impurities. The customers have to select larger filters or clean the filter manually and freqeuntly, which means expensive investment, hard work, valuable liquid loss. DFA filter solves these kinds of problems by its advanced self-cleaning principle. It always keeps the filter element clean, discharges waste liquid with high impurity concentration, reduces the liquid loss. When filtering the viscous liquids such as dirty water, adhesives, resins, polymers and oils, DFA filter works more efficiently. DFA filter is taking place of the vibrating screen, bag filter, basket filter and some kind of back-flushing filter by its technical advantages and low running cost.

For DFA filter, LIVIC has developed about 20 specific ACS control system models, which are categorized into basic and advanced version. They are based on Simens LOGO!, run LIVIC's programs, efficiently control the filter and meet various automatic control requirements.
Basic version is the time control type. The cleaning cycle and the purging cycle are set by time cycle. No differential pressure instrument.

Advanced version has both differential pressure(D.P. for short) and time cleaning modes. The D.P. indicates the filter cake accumulation and the filter element clogging. When it reaches the preset D.P. value under D.P. mode, the cleaning sequences are triggered. The recommended D.P. value is 50KPa, which can be adjusted between 10 and 100KPa. The D.P. mode is the most efficient and widely applicable. The time mode can be set between 0 and 24 hours. If the D.P. mode fails, the time mode still works as the final safety protection. The preset time shall be close to the average cycle under the D.P. mode.

Advanced version reserves three dry contact points, which indicate the power status, cleaning status and failure feedback. The failure feedback includes the over-load D.P., valve action failure, scraper stucking. It monitors the filter, feedback the failure in time, prevent the equipment damage and prevent the liquid waste and pressure fluctuation in time because of the valve failure.

Two types of D.P. instruments available: one D.P. transmitter or two pressure transmitter as the combination measurement. The transmitter is sensitive and reliable and outputs the real time D.P..

The specified ex-proof class design is available. All instruments and control panel meet the ex-proof requirements. The control system based on the Simens S7-200 PLC is also available, can be configured into DCS and supports Profibus-DP or Modbus communication protocals.

Specifications:

Applications:

■ Applicable Industries: petro-chemical, fine chemical, pulp and paper, food and beverage, water treatment, etc.

■ Applicable Liquid Types: wax, coal oil, monomer, polymer, citric acid, fermented broth, cosmetics, silicon solution, soap, sorbitol, steriodsugar, wet end additives, adhesives, inks, lubricating oils, coatings, resin, rubber, ethanol, miscella, edible oil, juice, diesel, etc.

TECHNICAL FEATURES AND ADVANTAGES

■Up-and-down reciprocating scraping, scrape impurities off directly, especially good at viscous liquid filtration and removing viscous suspending impurities
■Simple structure, easy disassembly, pull the filter element out easily after removing the scraper, easy for internal cleaning
■Automatic operation, continuously on-line filtration, terminate the hard work of filter element replacement and cleaning
■No disposable filter media, save the cost of filter media consumption and the environment treatment
■Very low filtration pressure drop, steady flow rate, save the energy, good for keeping the process continuous and steady
■Closed filtration, prevent danger of liquid leakage, good for safety production and operator’s health