Rectangular Chamber With Smooth Round Corners And Jacket Medical Instrument Sterilizer Machine

Rectangular Chamber With Smooth Round Corners And Jacket Medical Instrument

Sterilizer Machine

Sterilizers shall be horizontal with vertically opening double door, horizontal chamber
type (rectangular chamber with smooth round corners and jacket) with fully automated operating
system. The entire construction including all components shall be fully compliant with cGMP
requirements

Sterilization Chamber

The chamber shall be rectangular, with smooth and rounded corners.

The chamber shall be designed as per GB150 pressure vessel code.

The chamber shall be made of AISI 316L or 304 with surface roughness less than 0.5µm.

The chamber shall be re-inforced with an AISI 304 jacket.

The sterilizer support frame for the entire structure shall be made of AISI 304.
The sterilizer shall be able to reach and maintain sterilization temperature of 121°±1.0°C

Chamber Doors

All Steam sterilizers shall have double door.
The door made of AISI 316L with internal surface roughness less than 0.5µm.
Sliding door models. Door opening and closing shall be automatic.
The door gaskets made of high temperature resistant silicone rubber with rounded corners.

Door Safety

The following door safety features provided for operator safety:
 Door interlocking to prevent simultaneous opening of both the doors.
 Door process lock to prevent opening of doors when the process is on.
 Sterile side door to open only after sterilization cycle.

Insulation

The sterilization chamber shall be insulated with thick mineral wool, hold in place by an outer
cover of AISI 304. Chamber insulation shall be in such a way that the external surface
temperature shall not exceed 50ºC during operation.

Piping

All piping made of AISI 316 with internal surface roughness less than 0.5µm.

All welds on piping made with orbital TIG method.

All non contact surfaces shall be of AISI 304.
All pipes installed to ensure the possibility to drain them completely and avoid condensate residuals..
Steam traps of sanitary design shall be provided in the steam lines for condensate removal.
All the pipe fittings shall be of sanitary Tri-clover type.

Brochure load down from here

Medpharm medical large steam autoclave brochure.pdf

MEDPHARM Company team is committed to providing quality sterilization products, service, parts and

maintenance training at significant savings. From customized parts packages to turnkey equipment

 acquisition and installation, our innovative sterilization solutions are designed to meet our customers' needs.

We understand that untimely breakdowns are costly and can be detrimental to your everyday operations.

Our  service team is compromised of expert technicians that respond quickly to all of your service needs.

We offer on-site service support including inservices, installation and deinstallation of your equipment. From

breakdown  repairs to comprehensive maintenance programs, we have an innovative service solution for you.

We will service on-Site Repairs.Our staff is equipped with the resources required to provide you with

on-site,   on-time repairs in compliance with manufacturer specifications. We also provide installation,

deinstallation, and inservices on most makes and models of sterilization equipment. Near or far we can

 provide you with service support that you need.

Our reconditioning background has taught us of the importance of having quality parts on hand at all times.  We have a large inventory of individual repair parts, as well as preventive maintenance kits, and consumables  in stock and ready to ship today.

With our expert technical support staff, it is not always necessary to have part numbers to place an order.

 We will help you identify the quality parts that you need.