Nonmetal Accelerated Aging Calculator Ozone Chamber CE Leakage Protection

Nonmetal Materials Ozone Chamber CE Leakage Protection Accelerated Aging Chamber

usage

nonmetal materials Ozone Chamber CE Leakage protection Accelerated Aging chamber is used to do aging test of nonmetal materials and Organic materials(such as plastic.rubber,paints and so on) .

Ozone System

As a result of the intermediate frequency high voltage power supply, due to the corona electrode does not produce heat, so that the concentration of ozone generated stable, will not change with the level of working hours or gas flow caused by the ozone concentration decreases. The high-frequency ceramic surface discharge corona generator due to the high frequency voltage discharge, when the temperature of the discharge region can not be effectively dissipated, leading to decomposition of ozone due to overheating, use under high flow conditions appropriate
The use of integrated ozone concentration ﹑ temperature and humidity controller (setting mode for the touch of a button type), high integration, good reliability, LED display, display resolution temperature (0.1 ℃), humidity (0.1% RH), the ozone concentration ( 1pphm), PID setpoint control, easy to operate

Character

1..External adopt CNC machine tools,looks beautiful,Explosion-proof door handle,easy opration
2.Inner material is imported mirro stainless steel
3.Insulation material is High-density glass fiber cotton
4.Wind system is adopted long fan made of aluminum alloy,preventing Convection vertical diffusion. 5.Entrance material is two-zone glue silicon which can work in high and low pression
6.Bottom is universal round wheel and fixed foot
7.Window materials is multilayer steel-glass, the inside is chip conductive
8.Inner is 360’ sample farm
9.Encloused is six pair aluminum alloy fixture(three is ...)


Control System

Temperature controller is imported digital mircrocomputer type screen with PID system ,automatic calculating,man-machine dialogue operation mode,touch type.

Specification

Corresponding standard

JIS K 6259 , ASTM1149 , ASTM1171, ISO1431, DIN53509 , GB/T13642, GB/T 7762-2003
GB 2951

Testing method

According to the test methods and standards can be divided into "static" and "dynamic" static means that the sample was put up after a good stretch to do the test chamber, the dynamic is placed on the sample chamber jig, doing side stretch test, tensile floating about 5% -45% of the sample itself.

Heating and Cooling Systems

Using far infrared high-speed heating nickel alloy heating wire;
Ozone, temperature, humidity, completely independent refrigeration systems;
Temperature control the output power by the microcomputer calculus, to achieve high accuracy and high efficiency power efficiency;
Compressor: closed France Taikang 1 set;
Cooling: air-cooled;
Refrigerant: R404A;
System-wide ventilation pipes are pressurized 48H for leak testing;
Heating and cooling system is completely independent;
Refrigerant spiral brass;
Slope evaporator;

Structural Design

A reasonable position to set up a transparent door window for the observation of changes in the indoor samples. Multi-layer hollow glass observation window, glue chip inside the conductive film having a transparent, heat, frost and other advantages difficult to produce steam
The long axis of the fan motor equipment used for mixing, high temperature resistance of stainless steel multi-blade impeller, to achieve strength convection in a vertical diffusion cycle, the temperature of the laboratory and has remained stable even
No reaction door handle, easier operation
Bottom of the machine can be fixed installation of high-quality PU wheels, the machine can be easily moved to the specified location, and finally fixed castors

Service and maintenance points

1, adhere to the cabinet neat appearance.
2, to prevent external carom box; cabinets to prevent dust entering.
3, laboratories adhere to a dry environment; prohibit contact with chemicals.
4, to prevent the device temperature exceeds the set temperature range.
5, each boot before the first check circuit control system is normal; the power cord is not properly in accordance with the convergence criteria, and indeed grounded.
6, view over-temperature protection, whether the setting.
7, indoor ventilation fan should be installed to maintain good indoor ventilation.
8, spray experimental investigation to the attention of the tank water level is too low.
9, wastewater discharge system equipment necessary means in place.
10, after the experiment is finished, the machine will cut off the power supply block, interior cleaning equipment.
11, the device must be done by professionals.

Image:

Haida International Equipment Co., Ltd Company Profile

Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as paper&packaging test equipment, Furniture test equipment, material mechanics test equipment, optical measurement equipment, environmental reliability testing equipment etc. With the persistent efforts of all staff, Haida owned 4 factories with total 60,000 square meters, 15 branch offices covers South China, North China, East China, Central China and Northwest China, as well over 20 overseas after-sales service sites covers Southeast Asia, Europe, North America and the Middle East with over 28,000 customers.

Haida main business scope includes equipment production, non-standard equipment customization, software development, measurement and maintenance consulting services. The company has passed ISO9000 certification and multiple certifications by internationally renowned testing organizations such as BV, SGS, TUV, and its products comply with GB, ISO, ASTM, EN, JIS, TAPPI, ISTA, DIN, BS and other domestic and foreign standards. Meanwhile, invested a large amount of research and development funds to adhere to the product concept of R & D , sales and products reserve to walk at the forefront of the industry. Moreover Haida participated in composing of furniture test standards and commonly drew up CY/T229-2020 industry standards with the National quality inspection, jointly developed industry test equipment with the National Paper Products Center and Dongguan Quality Testing Furniture Laboratory, co-built the reliability laboratory with many well-known enterprises, and Jointly built the dangerous articles packaging laboratory with Guangdong Huangpu Customs Technology Center.

Haida adheres to the vision of "To be the World Class Testing Equipment enterprise" and attaches importance to platform construction and talent reserves. Having 630 employee which contain 150 technicians and more than 300 bachelors, 5 Masters, and 3 PhDs. Haida have won 2 national invention patents and over 100 utility model patents, At the same time, established 5 industry-university-research cooperation bases with universities and research institutes and invited more than 20 doctoral supervisors as consultants.

Looking forward to the future, Haida will fulfill the mission of "Deliver the best testing equipment to our customers" and adhere to the core values of "Creative, Efficiency, Inheritance, Passion and Persistence". Taking a green, low-carbon, and environmentally friendly sustainable development path, Haida will continuously optimize the product structure to realize the transformation and upgrade of the enterprise itself. It is the eternal pursuit of Haida people to build Haida into a comprehensive provider of testing equipment with advanced technology, excellent quality, high-quality service, and win-win cooperation!

Haida Headquarter

Haida Facyory

Haida Team