Aramid honeycomb Core Fiberglass Plate used in municipal engineering

Aramid honeycomb Core Fiberglass Plate used in municipal engineering.

Introduction

Glass honeycomb panel structure design thought source of h beam structure: table plate is equivalent to

the wing plate of h beam, main under normal stress;Middle of cellular layer of h beam web plate, the main

under shear stress.Special-shaped glass fiber honeycomb panel of the structure of the two table plate height is big, have bigger

section moment of inertia, and good stiffness, bending strength;Intermediate sandwich layer bionic natural

honeycomb structure, less materials used, but the shear strength, good stability;Table plate and the

cellular layer optimization combination, the honeycomb panel has the advantages of light weight, good

strength and rigidity.Table plate and cellular choosing appropriate, also can obtain good aseismic, heat

insulation, sound insulation performance, etc.Because the honeycomb panel has light weight, small

radiation pollution, save the stone material, the plate size and other characteristics, can be used in the

ceiling, curtain wall, built in metope, ground, etc., widely used in construction, vehicles, ships and other

decoration.Honeycomb panel usually use 3-5 mm, 10-25 mm honeycomb panel, compounded by special

adhesive bonding.For a curtain wall outside, recommend the thickness of the honeycomb panel for 4-5

mm, bee nest plate thickness not less than 25 mm;For built-in metope, recommend the thickness of the

honeycomb panel for 3-4 mm, honeycomb panel thickness is 15 mm;For built-in condole top, recommend

the thickness of the honeycomb panel for 3-4 mm, honeycomb panel thickness is 15-20 mm;For the

panel, honeycomb panel recommended for 5-8 mm, the thickness of the honeycomb panel thickness for

10 to 15 mm.

Main Performance

Materials

PP honeycomb panel is made up of two pieces of thin panel, firmly bonded in a thick layer of honeycomb

core material on both sides and made of a sheet, which is also called honeycomb sandwich structure.
Introduction of honeycomb core material is to use the PC (polycarbonate), PP (polypropylene) hives,

aluminum, etc., processed into hexagonal, round the whole piece of core material (cellular) on an empty

stomach.The commonly used panel for PC, PMMA, PETG, aluminum, etc.Panel must adopt suitable

adhesive and the core material firmly together, can show the excellent properties of honeycomb panel,

which is better than strength, low thermal conductivity and good vibration resistance and other functions.

PP honeycomb panel according to the function points: buffer honeycomb panel and honeycomb panel of

packing.Due to its special structure, can improve the compressive strength, PP plastic honeycomb board

to reduce costs.Honeycomb panel aperture generally divided into: (round) 6 mm, 8 mm;12 mm.PP

honeycomb panel can make billboards, condole top, decorating plate, light boxes, etc.Plastic honeycomb

panel is developed countries rise this year to save resources, protect the ecological environment, low cost

of a new type of green decorative material, it has a light, strong, stable, heat preservation, heat insulation,

and many other advantages.Characteristics 1, 2, installation convenient 3 plate flatness high sheet, light

weight, high strength 5, honeycomb core material help space the heat preservation effect of 6, rich color

and surface treatment are available in July and high quality materials and advanced processing

technology, ensure the honeycomb panel durable - in detail -
PP honeycomb products are mainly used in: 1. The building board (2) partition, condole top 3. Furniture

USES sheet 4. Fairing, wind curtain 5. Air filtration and purification, park, garden drainage road, parking

lot, road 6. Display case 7. Van body, car roof and trunk 8. Radome.

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.