3k Full Glass Carbon fiber tube 1000mm Length for industrial R/C booms

Full Glass Carbon fiber tube 1000mm and 10*8mm with The glass fiber and standardizing.

Introduction

1. The Carbon Fiber tubes are glass fiber widely used for industries R/C booms, telescopic poles, walking sticks, DSLR rigs etc.
2. N.W.:44.86g/pc ,Working Temperature: 80 Celsius Degree or Below
3. The 10mm OD×8mm ID×1000mm Length tube is mainly for R/C quadrocopter booms.
4. Round Carbon Fiber tubes are Carbon Fiber Epoxy Prepreg Fabric table-rolled outside a mandrel of certain diameter and thermoset at temperature 125 Celsius Degree.
5. The mandrel, which is also referred as mould, is then demolded and ground on the Centerless ground machine to ensure the outer diameter tolerance.
6. The Carbon Fiber tubes are cut by diamond blade.

Specification

Applications

The Carbon Fiber tubes aremade of organic fibre by carbonization and graphitization treatment of

microcrystallineink materials.The micro structure of carbon fiberArtificial graphite,Is disorderly layer

of graphite structure.
The Carbon Fiber tubes are a kind of excellent mechanical properties of new materials,
It's less than steel the A quarter, the tensile strength of carbon fiber resin composite materials are

generally in 3500 mpa Above, is a steel 7 ~ 9 Times, tensile elastic modulus Amount for 230 ~ 430 gpa
Also higher than that of steel.so CFRP Than the strength of the strength of the material with the ratio of

the density can be achieved 2000 mpa/(g/cm3) Above, and A3 Than the strength of the steel is only
59 mpa/(g/cm3) Left and right sides, the modulus of than is higher than steel.material
greater than the strength of the component the less weight, higher than the modulus, the greater the,

stiffness of the artifacts, in this sense has been predicted The broad application prospect of carbon fiber

in engineering. Through a variety of new composite materials(Such as polymer composite material, metal
Matrix composites,Ceramic matrix composites)The outstanding performance,Many people expect,
The human on the material used is moving from an era of iron and steel Into an era of composite materials

are widely used.

FAQ

a. Q : Can I have a sample order?

b: Yes,we welcome sample order to test and check quality.Mixed samples are acceptable.

a. Q : What is the lead time?

b: Sample needs 1-3 days,mass production needs 10-15 days,also according to the order volume.

Our Services

1. Customers' Pursuits for Change, Lijin's Motivation for Grow.

2. The main materials we use are all high level in the domestic.

Shipping

1. Normally, the parcel will be shipped out within 3-5 working days after payment is received.

2. And we also make the lower commercial invoice for custom clearing to avoid the big tax according to

most of our customers’ requirement.

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.