High Tensile Strength 1mm Carbon Fiber Sheet 3K Corrosion Resistance

1.0mm Thickness 400 x 500mm 3K TG Carbon Fiber Plate / Sheet with Immediate shipping.

Features

1. the tensile strength is 10 times more than ordinary steel, elastic modulus is superior to the steel,

excellent creep resistance and shock resistance;
2. light weight, good flexibility, high specific strength, weight is only 1/5 of the steel, higher toughness,

can volume;
3. construction is convenient, easy to guarantee construction quality, the material without rehearsals,

convenient process;
4. good durability and corrosion resistance, acid, alkali, salt and corrosion of atmospheric environment,

can be used in harsh, the narrow site in the maintenance and reinforcement of the concrete structure

engineering.

Specification

The development

Regrettably, Rolls-Royce pushed the the most current technology too aggressively, in using carbon

fiber in the engine's compressor blades, which proved vulnerable to damage from bird impact. What

seemed a great British technological triumph in 1968 quickly became a catastrophe as Rolls-Royce's ambitious schedule for the RB-211 was endangered. Rolls-Royce's problems became so great that the company was finally nationalized by Edward Heath's

Conservative government in 1971 and the carbon fiber manufacturing plant sold to form Bristol

Composites.

Given the limited market for a very expensive product of variable quality, Morganite also decided that

carbon fiber manufacture was peripheral to its core business, leaving Courtaulds as the only big UK

manufacturer.The company continued making carbon fiber, developing two main markets: aerospace

and sports equipment. The speed of manufacture and the quality of the product were improved.

During the nineteen seventys, experimental work to find alternative raw materials led to the introduction

of carbon fibers made from a petroleum pitch derived from oil processing. These fibers contained about

85% carbon and had excellent flexural strength.

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.